9 Tukang Innovation Drive
Gate+
9 Tukang Innovation Drive

TENURE
30 Years
EXPECTED TOP
30 Jan 2029
NUM OF STOREYS
10
TOTAL UNITS
265
TENURE
30 Years
EXPECTED TOP
30 Jan 2029
NUM OF STOREYS
10
TOTAL UNITS
265
ABOUT THE PROPERTY
B2 Ramp up Industrial
Located at the heart of the western industrial powerhouse, GATE+ is surrounded by lifestyle amenities and retail destinations that support daily convenience and workforce accessibility. Close proximity to Jurong Innovation District, Tuas Checkpoint, and Tuas Mega Port also ensures strong connections to innovation, cross-border trade, and global logistics networks, making it a prime location for any business keen to stay connected with the world.
ABOUT THE PROPERTY
B2 Ramp up Industrial
Located at the heart of the western industrial powerhouse, GATE+ is surrounded by lifestyle amenities and retail destinations that support daily convenience and workforce accessibility. Close proximity to Jurong Innovation District, Tuas Checkpoint, and Tuas Mega Port also ensures strong connections to innovation, cross-border trade, and global logistics networks, making it a prime location for any business keen to stay connected with the world.
PROJECT INFORMATION
DEVELOPER
Tukang Project Pte. Ltd.
PROJECT NAME
Gate+
LAND TENURE
30 Years
LOCATION
9 Tukang Innovation Drive
EXPECTED TOP
30 Jan 2029
EXPECTED VACANT POSSESSION
30 Jan 2029
EXPECTED LEGAL COMPLETION
30 Jan 2032
BUILDING SPECS
Stories
10
Total Units
265
Carpark Lots
116
Ramp Up
Yes. Up to level 9
Floor to Floor Ht (M)
Level 1: 6.3 m - 7m | Level 2 to 10 : 6.125 m
Live Load (kN/m2)
10 kN/m2
Electrical Power (Amp)
Factory units: 60 Amp TPN
BUILDING SPECS
PASSENGER LIFTS
4
SERVICE LIFTS
4
PROVISION FOR EV LOTS
6
No. of canteens
2
SPECIAL UNITS
Heavy Vehicle Park
SITE AREA
201,145 Sq.Ft.
MAX GFA
502,863 Sq.Ft.






ABOUT THE AREA
About Gate+
Position your business at the doorstep of the dynamic Jurong Lake District, one of Singapore’s fastest-growing economic hubs supported by a strong ecosystem of innovation, enterprise, and talent. As major investments continue to shape the district’s future business landscape, this strategic location offers an exceptional foundation for companies seeking growth, collaboration, and long-term value.
ABOUT THE AREA
About Gate+
Position your business at the doorstep of the dynamic Jurong Lake District, one of Singapore’s fastest-growing economic hubs supported by a strong ecosystem of innovation, enterprise, and talent. As major investments continue to shape the district’s future business landscape, this strategic location offers an exceptional foundation for companies seeking growth, collaboration, and long-term value.


RELATED PROPERTIES
Discover related properties
similar to this
RELATED PROPERTIES
Discover related properties
similar to this
FAQ
Answers to the questions
we hear most
We’re here to make your property journey simple and clear. If you don’t see what you’re looking for, don’t hesitate to reach out, we’re happy to provide guidance and personalized advice.
Is there ABSD (Additional Buyer's Stamp Duty) for industrial property?
No. Unlike residential real estate, pure industrial properties in Singapore do not attract any Additional Buyer’s Stamp Duty (ABSD)—regardless of your nationality or how many properties you currently own. You are only required to pay the standard Buyer's Stamp Duty (BSD) alongside a 9% GST. If your purchasing company is GST-registered, that 9% can be claimed back as an input tax credit, making it entirely cost-neutral. When you compare this to the residential market—where Singaporeans pay 20% ABSD on a second home and foreigners face a massive 60% tax—the zero-ABSD nature of industrial space makes it a highly capital-efficient asset.
What is Seller's Stamp Duty (SSD) for industrial property?
A: Yes, but only if you sell the property within the first three years of purchasing it. This policy is in place to discourage short-term speculative "flipping." The SSD rates are calculated based on the sale price or market valuation (whichever is higher): • Sold within Year 1: 15% • Sold within Year 2: 10% • Sold within Year 3: 5% • Sold after Year 3: 0% (No SSD payable) If you are buying a new launch to house your SME operations or holding it as a medium-to-long-term investment, you will be completely unaffected by this tax once the three-year window passes.
What is a ramp-up industrial building?
A ramp-up industrial building features wide, structural ramps that allow vans, lorries, and commercial vehicles to drive directly to units on upper floors. This completely eliminates the daily bottleneck of waiting for shared cargo lifts. By allowing you to load and unload right at your doorstep, turnaround times are drastically cut. Because of this massive operational advantage, ramp-up units command high demand from logistics firms, e-commerce operators, and light manufacturers.
What is the difference between B1 and B2 industrial property?
The main difference comes down to the type of industrial activity each zoning permits and the environmental buffer required between the property and its surroundings. B1 industrial is designated for clean and light industrial use — businesses that generate minimal pollution, noise, or nuisance. Think light manufacturing, electronics assembly, R&D, printing and publishing, and similar trades. Because their environmental impact is low, B1 properties require a smaller buffer (under 50m) from residential areas and are often located close to, or even alongside, housing. B2 industrial is designated for general and heavy industrial use — activities with a higher environmental impact such as heavy manufacturing, vehicle servicing, chemical processing, and biotech operations. These require a larger nuisance buffer (50m or more) and are typically sited further away from residential zones. Both B1 and B2 are subject to URA's 60:40 rule: at least 60% of gross floor area must be used for core industrial activities (manufacturing, warehousing, or R&D), while up to 40% may be used for ancillary purposes like offices, showrooms, or staff amenities. In short: if your business involves clean, light operations, a B1 property is suitable and offers more convenient locations. If you run heavier industrial processes, you'll need a B2 property — which also permits the full range of B1 uses.
Can foreigners buy industrial property in Singapore?
Yes. Foreigners can freely purchase industrial property in Singapore, including both B1 (light industrial) and B2 (general/heavy industrial) units. Unlike residential property, industrial and commercial property is not restricted under the Residential Property Act, so there is no need to seek government approval based on nationality. There are two practical advantages that make industrial property especially attractive to foreign buyers. First, no Additional Buyer's Stamp Duty (ABSD) applies — ABSD is charged only on residential purchases, where foreigners currently face a 60% rate. Second, ownership rules are more open, with no citizenship or residency requirement to hold an industrial unit. A few points to keep in mind. Many industrial properties, particularly those on JTC-leased land, carry eligibility conditions that can favour Singapore-incorporated companies or require the buyer to operate a qualifying business, so the purchasing entity often matters more than the individual's nationality. You should also confirm the property's zoning, as developments classified as "commercial and residential" are treated as residential under the Residential Property Act and would then carry the associated foreign-ownership restrictions and ABSD. In short: foreigners can buy industrial property in Singapore with no nationality-based restriction and no ABSD — but it's worth checking the specific tenure, zoning, and any JTC conditions tied to the unit before committing.
FAQ
Answers to
the questions
we hear most
We’re here to make your property journey simple and clear. If you don’t see what you’re looking for, don’t hesitate to reach out, we’re happy to provide guidance and personalized advice.
Is there ABSD (Additional Buyer's Stamp Duty) for new launches industrial property?
No. Unlike residential real estate, pure industrial properties in Singapore do not attract any Additional Buyer’s Stamp Duty (ABSD)—regardless of your nationality or how many properties you currently own. You are only required to pay the standard Buyer's Stamp Duty (BSD) alongside a 9% GST. If your purchasing company is GST-registered, that 9% can be claimed back as an input tax credit, making it entirely cost-neutral. When you compare this to the residential market—where Singaporeans pay 20% ABSD on a second home and foreigners face a massive 60% tax—the zero-ABSD nature of industrial space makes it a highly capital-efficient asset.
What is Seller's Stamp Duty (SSD) for industrial property?
A: Yes, but only if you sell the property within the first three years of purchasing it. This policy is in place to discourage short-term speculative "flipping." The SSD rates are calculated based on the sale price or market valuation (whichever is higher): • Sold within Year 1: 15% • Sold within Year 2: 10% • Sold within Year 3: 5% • Sold after Year 3: 0% (No SSD payable) If you are buying a new launch to house your SME operations or holding it as a medium-to-long-term investment, you will be completely unaffected by this tax once the three-year window passes.
What is a ramp-up industrial building?
A ramp-up industrial building features wide, structural ramps that allow vans, lorries, and commercial vehicles to drive directly to units on upper floors. This completely eliminates the daily bottleneck of waiting for shared cargo lifts. By allowing you to load and unload right at your doorstep, turnaround times are drastically cut. Because of this massive operational advantage, ramp-up units command high demand from logistics firms, e-commerce operators, and light manufacturers.
What are the differences between B1 and B2 industrial classification?
The Urban Redevelopment Authority (URA) classifies industrial spaces based on the environmental impact of the business operations. • B1 (Light Industrial): Designed for clean, low-impact operations like e-commerce, IT, R&D, media, and light manufacturing. Because they generate minimal noise or emissions (requiring a nuisance buffer of 50m or less), B1 properties are often located in highly accessible city-fringe areas. • B2 (Heavy Industrial): Reserved for heavier operations like automotive workshops, metal fabrication, and heavy manufacturing. These activities generate noise, vibration, or emissions, requiring a strict buffer of more than 50m from residential zones.
Is buying an industrial property better than renting?
Why Acquire Private Industrial Space? • Build Equity, Not Rent: Turn your monthly operational costs into a permanent asset with capital appreciation potential. • Total Operational Control: Enjoy permanent security of tenure. Customize your facility without landlord restrictions. • Subletting Potential: Generate secondary revenue by renting out any surplus space. • The Investor’s Edge: Secure high-yield, often freehold assets with zero Additional Buyer’s Stamp Duty (ABSD). • Need-to-Know Mechanics: Commercial purchases require cash and bank financing (no CPF allowed). Buyers must also account for upfront GST and a 3-year holding period to avoid Seller's Stamp Duty (SSD).

Your journey
starts here
Shortlisted this project? Contact us to get more insights!

Your journey
starts here
Shortlisted this project? Contact us to get more insights!

